51 found, showing page 1 of 2
*GATE VALVE SOLDER TYPE 1/2"
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import.
View Details
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import.
2" PVC CHECK VALVE
Constructed of PVC, stainless steel spring loaded PVC poppet with neoprene seal. Rated at 200 P.S.I. at 72 deg. F. (Not for use with compressed air.) Solvent ends comply with ASTM B2466. Packed 1 per printed box. Import.
View Details
Constructed of PVC, stainless steel spring loaded PVC poppet with neoprene seal. Rated at 200 P.S.I. at 72 deg. F. (Not for use with compressed air.) Solvent ends comply with ASTM B2466. Packed 1 per printed box. Import.
1" SHARKBITE BALL VALVE
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.
View Details
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.
3/4" CTS REPAIR COUPLING
Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe must be restrained after installation. Lead-free.
View Details
Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe must be restrained after installation. Lead-free.
1/2" CTS REPAIR COUPLING
Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe must be restrained after installation. Lead-free.
View Details
Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe must be restrained after installation. Lead-free.
1"FIP PRESUR REDUC VALVE
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 deg. F. to 180 deg. F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 deg. F. to 180 deg. F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" WATR PRESSURE VALVE
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 deg. F. to 180 deg. F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in Female threaded union or solder union inlet x NPT threaded Female outlet. 400 P.S.I. (27.6 bar) maximum working pressure, adjustable reduced pressure range from 25 to 75 P.S.I. (172 to 517 kPa) delivery pressure, standard factory reduced pressure setting is 50 P.S.I. Water temperature range: 33 deg. F. to 180 deg. F. Meets UPC, ASSE 1003, CSA standard B356, ANSI A112.26.2, Southern Standard Plumbing Code and IAPMO listed. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" CHECK VALVE
As required by plumbing codes in some areas to provide residential protection for public water supplies. For installations immediately downstream from residential water meters. Bronze body construction. F.I.P.S. connections. Can be installed horizontally or vertically. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
As required by plumbing codes in some areas to provide residential protection for public water supplies. For installations immediately downstream from residential water meters. Bronze body construction. F.I.P.S. connections. Can be installed horizontally or vertically. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1/2QCX3/8OD STRT VALVE
Make water supply stop installation quickly with the 1/2" x 3/8" Quick-Connect 1/4 turn straight valve water supply stops featuring Watts Quick-Connect technology. The revolutionary quick-connect ends work seamlessly with any 1/2" copper, PEX, or CPVC pipe. Simply make sure pipe is free of burrs, mark 1-1/2" from end of pipe and push the stop onto the pipe making sure stop is completely seated to the line marked on the pipe and it's ready to go. A minimum of 3-1/2" of pipe from the floor or wall is needed to insure correct installation. Quick-Connect Stops require no special tools and can be easily removed by pulling back on the collet ring and reused if needed. Bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Make water supply stop installation quickly with the 1/2" x 3/8" Quick-Connect 1/4 turn straight valve water supply stops featuring Watts Quick-Connect technology. The revolutionary quick-connect ends work seamlessly with any 1/2" copper, PEX, or CPVC pipe. Simply make sure pipe is free of burrs, mark 1-1/2" from end of pipe and push the stop onto the pipe making sure stop is completely seated to the line marked on the pipe and it's ready to go. A minimum of 3-1/2" of pipe from the floor or wall is needed to insure correct installation. Quick-Connect Stops require no special tools and can be easily removed by pulling back on the collet ring and reused if needed. Bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" SWT GATE VALVE
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*3/4" WATR METER COUPLING
Heavy brass construction. 125 P.S.I. threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Heavy brass construction. 125 P.S.I. threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
BASIN FAUCET
Heavy-duty chrome-plated brass construction, replaceable seat and stem. Energy efficient 2.2 GPM (gallons per minute) water saving aerator. Spout is 3.012" from middle of handle to middle of aerator. Includes both hot and cold index buttons. Import.
View Details
Heavy-duty chrome-plated brass construction, replaceable seat and stem. Energy efficient 2.2 GPM (gallons per minute) water saving aerator. Spout is 3.012" from middle of handle to middle of aerator. Includes both hot and cold index buttons. Import.
1/4" FIP CHRM BALL VALVE
Forged brass chrome-plated full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/8" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/2" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass chrome-plated full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/8" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/2" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/2" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/4" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" SWT BALL VALVE
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" FIP GATE VALVE
Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1-1/2" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/4" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" BRASS CHECK VALVE
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
CHECK VALVE 3/4"
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*CHECK VALVE 1/2"
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/8x1/2 GAS VALVE
Heavy forged brass construction, 1 piece body, hard chrome-plated forged brass ball, coated aluminum handle. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures up to 2 P.S.I.G. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Import.
View Details
Heavy forged brass construction, 1 piece body, hard chrome-plated forged brass ball, coated aluminum handle. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures up to 2 P.S.I.G. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Import.
1/2" FL GAS VALVE
Heavy forged brass construction, 1 piece body, hard chrome-plated forged brass ball, coated aluminum handle. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures up to 2 P.S.I.G. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Import.
View Details
Heavy forged brass construction, 1 piece body, hard chrome-plated forged brass ball, coated aluminum handle. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures up to 2 P.S.I.G. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Import.
3/8" FL GAS VALVE
Heavy forged brass construction, 1 piece body, hard chrome-plated forged brass ball, coated aluminum handle. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures up to 2 P.S.I.G. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Import.
View Details
Heavy forged brass construction, 1 piece body, hard chrome-plated forged brass ball, coated aluminum handle. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures up to 2 P.S.I.G. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Import.
1/2 CHK INLINE PVC IPS
Permit water to flow in one direction within a line with the ProLine Series PVC Check Valve. It acts as a backflow prevention device to prevent water from backing up into the fresh water supply. A steel-spring poppet with a rubber o-ring is the internal mechanism preventing water backflow. An arrow is molded onto the valve body to ensure correct installation for proper flow control.
View Details
Permit water to flow in one direction within a line with the ProLine Series PVC Check Valve. It acts as a backflow prevention device to prevent water from backing up into the fresh water supply. A steel-spring poppet with a rubber o-ring is the internal mechanism preventing water backflow. An arrow is molded onto the valve body to ensure correct installation for proper flow control.
3/4" FLOAT VALVE
Bronze construction, dual inlet thread for connecting pipe and locknut. Male inlet; male outlet. High-tensile serrated arms, machined flange for support against tank wall, replaceable seals, locknut included. 14 In. - 20 In. float rod connection. Import.
View Details
Bronze construction, dual inlet thread for connecting pipe and locknut. Male inlet; male outlet. High-tensile serrated arms, machined flange for support against tank wall, replaceable seals, locknut included. 14 In. - 20 In. float rod connection. Import.
1/2" FLOAT VALVE
Bronze construction, dual inlet thread for connecting pipe and locknut. Male inlet; male outlet. High-tensile serrated arms, machined flange for support against tank wall, replaceable seals, locknut included. 14 In. - 20 In. float rod connection. Import.
View Details
Bronze construction, dual inlet thread for connecting pipe and locknut. Male inlet; male outlet. High-tensile serrated arms, machined flange for support against tank wall, replaceable seals, locknut included. 14 In. - 20 In. float rod connection. Import.
3/8" GAS VALVE
Heavy forged brass construction with 1-piece body. Hard chrome-plated forged brass ball, coated aluminum handle. A.G.A.certified for use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures up to 2 P.S.I. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Threaded ends comply with ANSI B2.1. Both endsare Female pipe thread. Import.
View Details
Heavy forged brass construction with 1-piece body. Hard chrome-plated forged brass ball, coated aluminum handle. A.G.A.certified for use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures up to 2 P.S.I. and temperatures up to 175 deg. F. UL listed for use with water up to 175 P.S.I. Threaded ends comply with ANSI B2.1. Both endsare Female pipe thread. Import.
3/4" HOSE BIBB LOCK
B & K flow lock. Unique locking device helps protect and conserve water. Fits all 3/4 In. hose thread outlets. No tools required to install. Made from heavy duty non-rusting material. Includes 2 keys that are keyed alike.
View Details
B & K flow lock. Unique locking device helps protect and conserve water. Fits all 3/4 In. hose thread outlets. No tools required to install. Made from heavy duty non-rusting material. Includes 2 keys that are keyed alike.
3/4" LOOSE KEY HOSE BIBB
B & K loose key hose bibb valve for use with water or oil. Neoprene seal washer. 3/4 hose thread outlet. Pipe threads comply with ANSI B1.20.1 Hose threads comply with ANSI B1.20.7. Loose key prevents use of valve when removed. Meets NSF 61-9 approved low lead standards. Boxed. 3/4 In. MIP. Loose key design prevents valve being used while key is not present.
View Details
B & K loose key hose bibb valve for use with water or oil. Neoprene seal washer. 3/4 hose thread outlet. Pipe threads comply with ANSI B1.20.1 Hose threads comply with ANSI B1.20.7. Loose key prevents use of valve when removed. Meets NSF 61-9 approved low lead standards. Boxed. 3/4 In. MIP. Loose key design prevents valve being used while key is not present.
1/2" LOOSE KEY HOSE BIBB
B & K loose key hose bibb valve for use with water or oil. Neoprene seal washer. 3/4 hose thread outlet. Large flow. Pipe threads comply with ANSI B1.20.1 Hose threads comply with ANSI B1.20.7. Loose key prevents use of valve when removed. Meets NSF 61-9 approved low lead standards. Boxed. 1/2 In. MIP. Loose key design prevents valve being used while key is not present.
View Details
B & K loose key hose bibb valve for use with water or oil. Neoprene seal washer. 3/4 hose thread outlet. Large flow. Pipe threads comply with ANSI B1.20.1 Hose threads comply with ANSI B1.20.7. Loose key prevents use of valve when removed. Meets NSF 61-9 approved low lead standards. Boxed. 1/2 In. MIP. Loose key design prevents valve being used while key is not present.
1/2" SLIP BALL VALVE
SharkBite Slip Ball Valve is a high quality forged brass ball valve with SharkBite connections. The SharkBite connections allows the user to connect the ball valves to copper tubing, CPVC and PEX in seconds with relative ease. The ball valve has an added slip feature for easy installation. The added slip feature allows for simple replacement of an existing ball valve or allows installation in an existing line where there is little to no play in the pipe system. IGC 157-2010 approval.
View Details
SharkBite Slip Ball Valve is a high quality forged brass ball valve with SharkBite connections. The SharkBite connections allows the user to connect the ball valves to copper tubing, CPVC and PEX in seconds with relative ease. The ball valve has an added slip feature for easy installation. The added slip feature allows for simple replacement of an existing ball valve or allows installation in an existing line where there is little to no play in the pipe system. IGC 157-2010 approval.
